Product ID:ALKYD VARNISH BLP POLY-VAR SATIN FIN VAR C
MSDS Date:02/27/1986
FSC:8010
NIIN:00N009345
MSDS Number: BCSFH

MOBILE PAINT MFG.CO.,INC.

HAMILTON BLVD
THEODORE, AL 36590
US

Emergency Phone: 800-292-6678, 800-462-0800

Info Phone: 205-653-0110

Cage: 88633

MOBILE PAINT MANUFACTURING CO INC

717 THEODORE, AL 36582 US

Telephone: 334-443-6110

Cage: 88633

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 50%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

AROMATIC HYDROCARBON

CAS: 64742-47-8

Fraction By Weight: <5%

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALE:ANESTHETIC.EXCESS INHALE CAN
CAUSE IRRITATION TO RESP TRACT,OR ACUT NERVOUS SYSTEM
DEPRESSION.PROGESSIVE STEPS:HEADACHE,DIZZINESS,STAGGERING
GAIT,CONFUSION,UNCONSCIOUSNESS,COMA,EVEN ASPHYXIATIO
N.SKIN:IRRITATION,DEFATTING,DERMATITIS.SENSITIZER.EYE:IRRITATION,RE
DNESS,TEARING,BLURRED VISION.INGEST:GI UPSET N&V,DIAR
Explanation of Carcinogenicity:NA
Effects of Overexposure:INHALE:ANESTHETIC,IRRITATION OF RESP
TRACT,ACUTE NERVOUS SYSTEM
DEPRESSION.PROGRESSIVE:HEADACHE,DIZZINESS,STAGGERING
GAIT,CONFUSION,UNCONSCIOUSNESS,COMA,EVEN ASPHYXIATION.SKIN:MOD
IRRITATION,DEFATTING ,DERMATITIS,SENSITIZER.EYE:SEV
IRRA,REDNESS,TEARING,BLURRED VISION,SENSITIZER.INGEST:GI
IRRITAT.NAUSEA,VOMITING&DIARRHEA
Medical Cond Aggravated by Exposure:NONE LISTED BY MFG

First Aid:INHALE:REMOVE TO FRESH AIR ADMIN O*2 IF BREATHING IS
DIFFICULT.RESTORE BREATHING IF NECESSARY.TREAT
SYMPTOMATICALLY.CONSULT A PHYSICIAN.SKIN:WASH AFFECTED AREA WITH
SOAP & H*2O.REMOVE CONTAM CLOTHING. EYE:FLUSH IMMED WITH H*2O FOR
15MIN.SEEK MEDICAL ADVISE.INGEST:DRINK I OR 2 GLASSES OF H*2O.DO
NOT INDUCE VOMITING.ASPIRATION MAY CAUSE CHEMICAL
PNEUMONITIS.CONSULT A PHYSICIAN IMMEDIATELY

Flash Point Method:SCC
Flash Point:107F/41.6C
Lower Limits:1.0
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROT EQUIP INCL SCBA.H*2O SPR MAY BE
INEFF.H*2O FOG IS PREF.H*2O MAY BE USED TO COOL CLSD CONT TO PVT
PRESS BLD UP AND POSSIBLE AUTOIGNITION OR EXPLOSION
Unusual Fire/Explosion Hazard:DURING EMER COND OVEREXP TO DECOMP PROD
MAY CAUSE A HLTH HZD.SYM MAY NOT BE IMMED APPARENT.GET MED ATT.KEEP
CONT TGHT CLSD.ISOLATE FROM HEAT,ELEC(SEE SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAME,HOT
SURFACES,ELECT.STATIC,OR FRICTIONAL SPARKS).AVOID BREATHING
VAPORS.VENTILATE AREA.CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NONSPARKING TOOLS.
Neutralizing Agent:NONE LISTED BY MFG

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48.8C.LARGE
QUANT.IN BLDG DSND IAW OSHA 1910.106 PREVENT LEAKAGE.AWAY FROM
HEAT,SPARKS OR FLAME.DRMS NOT USED FOR OTHER USES
Other Precautions:AVOID CONTACT.CAN CAUSE ALLERGIC RESP REACTION.CAN
CAUSE ALLERGIC SKIN REACTION.AVOID BREATHING SANDED DUST.CLOSE
CONTAINER AFTER USE.

Respiratory Protection:IN CONFINED AREAS USE NIOSH/MSHA APPROVED AIR
LINE RESPIRATORS OR HOODS.IN RESTRICTED VENTILATION AREAS USE
NIOSH/MSHA APPROVED CHEMICAL/MECHANICAL FILTERS DSND TO REMOVE COMB
OF PARTICULES&VAPORS&GAS .IN OUTDOOR OR OPEN AREAS(SEE SUPP DATA)
Ventilation:ALL APP AREAS SHOULD BE VENTED IAW OSHA
1910.94,.107,.108.RMV DECOMP PROD FORMED DURING HOT WORK,IF BAKING
VENT FUMES
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:PROTECTIVE OUTERWARE & PVT PROLONGED SKIN
CONTACT WITH CONTAMINATED CLOTHING
Supplemental Safety and Health
CHEMTREC-800-424-9300 BP:73.8-204.4C(RESP PROT)USE NIOSH/MSHA APPROVED
FILTER DSNG TO RMV SOLID AIR BORNE PARTICLES OF OVERSPRAY DURING
SPRAY OPERATIONS.(UNUSUAL FIRE HZD)EQUIP SPKS&OPEN FLAME.CLSD CO NT
MAY EXPLODE WHEN EXPD TO EXT HT.APPLICATION TO HOT SURFACES
REQUIRES SPECIAL PRECAUTIONS.

Boiling Pt:B.P. Text:165-400F
Vapor Pres:2.0MMHG
Vapor Density:>AIR
Spec Gravity:.89
Evaporation Rate & Reference:SLOWER THEN ETHER
Percent Volatiles by Volume:63.7

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:MAY PRODUCE HZD FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE,&FEDERAL
REGULATIONS.INCINERATE IN AN APPROVED FACILITY.DO NOT INCINERATE
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.